Arctic Cooling P12 PWM PST – 5 Pack

EAN: 0872767009561SKU: ACFAN00137ACategorie: Merk:

€ 29,95€ 24,75 incl. btwexcl. btw

Nooit meer leverbaar

Arctic Cooling P12 PWM PST – 5 Pack – 120 x 120 x 25mm – 200 – 1800 rpm

P12 PWM PST

Pressure-optimised 120 mm Fan with PWM PST
P-Series-Pressure-Optimised

OPTIMISED FOR STATIC PRESSURE

During the development of the new P12 PWM PST, special emphasis was placed on a focused airstream and thus a high static pressure. The fan guarantees extremely efficient cooling, even with increased air resistance. Therefore, the P12 PWM PST is particularly suitable for use on heatsinks and radiators.

P12-PWM-PST-Cooling-Capacity-EN

STRONG COOLING PERFORMANCE

Numerous improvements, such as an updated engine technology and a newly developed fan design, have noticeably increased the performance of P-fans. In internal performance tests leveled to 28 dB (A), the new P-fans left many competitors behind. More information can be found in our FAQ.

P12-PWM-PST-Power-Consumption-EN

MORE EFFICIENT TECHNOLOGY

The motor is powered by a PWM IC of the newest generation, which allows the new P12 PWM PST to run much more efficiently than its predecessors. This saves energy without compromising the performance.

Maximum-Quietness_EN

MAXIMUM QUIETNESS, MINIMUM VIBRATION

Even at low speeds the operating sound of the new ARCTIC motor is barely noticeable. Due to a sinus-magnetizing the new motor only creates about 5 % of the vibration from commutation of a regular DC-motor without filter. Consequently, there is no need for rubber spacers due to the steady and smooth torque of the new motor.

P12-PWM-PST-Extended-Lifespan-EN

EXTENDED LIFE SPAN

A 10 °C lower motor temperature roughly doubles the life span of a fan. The new ARCTIC motor has a four times longer service life through its low coil temperature. Consequently, we give a manufacturer warranty of 6 years.

PWM-PST-Cable-black

200 TO 1800 RPM REGULATED VIA PWM PST

Thanks to the 4-pin connector, the RPM can be regulated in a broad spectrum via PWM. In this way, noise is kept at a minimum while maximum cooling performance is guaranteed when needed.

Fluid-Dynamic-Bearing_New_EN

HIGH QUALITY BEARING

Thanks to an alloy/lubricant combination developed in Germany, friction within the bearing is reduced and greater efficiency is achieved. As a result, there is less heat development as well as less bearing noise, which means you can enjoy a longer service life from your fan.

P-Series-Intake-Exhaust-in-Case

TWO WAY INSTALLATION

  • Push warm air out of the case
  • Pull cool air into your case

TECHNICAL SPECIFICATIONS & MANUAL

General data
Performance
Fan Speed:
200 – 1800 rpm
Airflow:
56.3 CFM/ 95.7 m³/h
Static Pressure:
2.20 mm H₂O
Noise Level:
0.3 Sone
Operating Ambient Temperature:
0 – 40 °C
Warranty:
6 years
Fan
Fan Frame:
Standard
Control Type:
PWM PST
Connector:
4-Pin-Connector + 4-Pin-Socket
Fan Bearing:
Fluid Dynamic Bearing
Electric Characteristics:
Typical Voltage:
12 V DC
Starting Voltage:
3.9 V
Current/ Voltage:
0.1 A / 12 V
Cable Length:
400 mm
Size & Weight
Length:
120 mm
Width:
120 mm
Height:
25 mm
Weight:
145 g
Packaging
  •  Width: 130 mm
  •  Height: 127 mm
  •  Length: 123 mm
  • Weight: 0.8 kg
Gewicht 0,8 kg
Afmetingen 12,3 × 13 × 12,7 cm
Diameter

Geluidsniveau

Luchtstroom

Rotatiesnelheid

Stroomconnector